Mini Body Pov Camera AC29

Please follow the steps below to reconnect the camera to the app:

1. Turn on the camera
Press and hold the Power button to turn on the camera. Wait until the green Working indicator remains steadily lit.

2. Enable the camera's Wi-Fi
Quickly press the Power button twice to turn on Wi-Fi. The blue Wi-Fi indicator should light up.

The camera's Wi-Fi information is as follows:
Wi-Fi name (SSID): AC29_XXXXXX
Password: 12345678

3. Connect your phone to the camera
Open the Wi-Fi settings on your phone and connect to the camera's Wi-Fi network, AC29_XXXXXX, using the password 12345678.

4. Pair the camera with the app
Once connected, open the Viipulse app, tap the “+” icon in the upper-right corner, and follow the on-screen instructions to complete the pairing process.

Important:
Make sure no other device is already connected to the camera's Wi-Fi network.
Please temporarily disable any VPN on your phone before attempting to connect.

You may also refer to this video tutorial for step-by-step guidance: watch the connection tutorial
Could you please try these steps again and let us know whether the connection is successful? We will be happy to assist you further if the issue persists.
Our email: AC@yooomail.com

First, please long-press and hold the Power/OK button for a few seconds to see whether the camera turns on.

If it still does not power on, please REMOVE the SD card and test the camera without it. Connect the camera to a DC 5V/2A wall adapter using a USB cable, and then plug the adapter into a wall outlet. Please check whether the camera turns on automatically or responds when you press and hold the Power/OK button.

Please let us know the test results so that we can determine the cause and provide the most appropriate solution.

Our email: AC@yooomail.com

For the best performance and reliability, we recommend using a U3 or higher microSD card from a reputable brand with a capacity of 32GB to 128GB.

The device supports microSD cards with a maximum capacity of 256GB.

This camera supports both segment recording and loop recording.

With segment recording, you can set the length of each video clip to 1, 3, 5, or 10 minutes. The camera will continuously record and automatically save the footage as separate video files based on the selected clip length.

For example, if you select 1 minute, a 30-minute recording will be saved as approximately 30 separate one-minute video files.

When loop recording is enabled and the memory card becomes full, the camera will automatically overwrite the oldest video file and continue recording.
This process will repeat as needed, allowing the camera to record continuously without requiring you to delete files manually.

Please note that any important video files should be backed up before they are overwritten.

We hope this explanation helps. Please feel free to contact us if you have any further questions.