Mini Body Pov Camera AC27

For models: AC27X, AC27A
Regarding the Wi-Fi connection issue, please try the following steps:
Turn on the camera. In Video, Photo, or Time-Lapse Mode, press and hold the Wi-Fi button. The Wi-Fi hotspot information will then be displayed on the camera's screen.

Next, open the Vipulse App, tap the “+” icon in the top-right corner, and follow the on-screen instructions to add and connect the camera.

If it still doesn't work, please try the following:
1. Check whether the app has been granted the required data/network permissions.
2. Turn the camera's Wi-Fi off and back on, then try connecting again. Completely close the app and reopen it, then try connecting again.
3. The app may have saved incorrect or outdated cache information.

If the above steps don't resolve the issue, could you please try connecting the camera to another phone to see if the same issue occurs?

Please let us know the result, and we'll be happy to assist you further. Our email: AC@yooomail.com

For models: AC27B
Please scan the QR code below to download and install the Vipulse App.
1. Turn on the camera. In Video, Photo, or Time-Lapse Mode, press and hold the Wi-Fi button. The Wi-Fi hotspot information will be displayed on the camera's screen.
2. There are two ways to connect the camera:
Method 1: Quick Connection
First, turn on Wi-Fi and Bluetooth on your phone. Then open the Vipulse App, tap the “+” icon in the top-right corner, and select the camera when it appears. The camera will connect automatically.

Method 2: Manual Connection
If Wi-Fi and Bluetooth are not enabled on your phone, open the Vipulse App, tap the “+” icon in the top-right corner, and follow the on-screen instructions to add and connect the camera.

For more information, please refer to the video below: watch the connection tutorial
Please let us know the result, and we'll be happy to assist you further. Our email: AC@yooomail.com

First, please long-press and hold the Power/OK button for a few seconds to see whether the camera turns on.

If it still does not power on, please REMOVE the SD card and test the camera without it. Connect the camera to a DC 5V/2A wall adapter using a USB cable, and then plug the adapter into a wall outlet. Please check whether the camera turns on automatically or responds when you press and hold the Power/OK button.

Please let us know the test results so that we can determine the cause and provide the most appropriate solution.

Our email: AC@yooomail.com

When fully charged, the battery can last approximately 150 minutes under the following conditions:

Wi-Fi is turned off.
The screen saver is enabled.
The screen saver is set to activate after 30 seconds.

Please note that actual battery life may vary depending on the camera's settings and how it is used.

We hope this information helps. Please feel free to contact us if you have any further questions.

For the best performance and reliability, we recommend using a U3 or higher microSD card from a reputable brand with a capacity of 32GB to 128GB.

The device supports microSD cards with a maximum capacity of 256GB.

This camera supports both segment recording and loop recording.

With segment recording, you can set the length of each video clip to 1, 3, 5, or 10 minutes. The camera will continuously record and automatically save the footage as separate video files based on the selected clip length.

For example, if you select 1 minute, a 30-minute recording will be saved as approximately 30 separate one-minute video files.

When loop recording is enabled and the memory card becomes full, the camera will automatically overwrite the oldest video file and continue recording.
This process will repeat as needed, allowing the camera to record continuously without requiring you to delete files manually.

Please note that any important video files should be backed up before they are overwritten.

We hope this explanation helps. Please feel free to contact us if you have any further questions.

In Video Mode, briefly press the Wi-Fi button on the camera to switch between landscape and portrait orientation.

Alternatively, in Video Mode, press and hold the M button to enter the settings menu, then select Horizontal/Vertical Switch to change the orientation.

Please note that the camera supports 4K recording in landscape mode and 2.5K recording in portrait mode.